RB951G-2HnD

The RB951G-2HnD is a wireless SOHO Gigabit AP with a new generation Atheros CPU and more processing power. It has five Gigabit Ethernet ports, one USB 2.0 port and a high power 2.4GHz 1000mW 802.11b/g/n wireless AP with antennas built in.

In comparison with previous model RB751G-2HnD, it has more powerful 600Mhz CPU (instead of 400Mhz), more RAM – 128MB instead of 64MB, same form factor and price. The device is very small and will look good in any home or office, wall mounting anchor holes are provided.

Package contains RouterBOARD 951G-2HnD in a plastic case and power adapter.

Product specifications

Details
Product code	RB951G-2HnD
CPU nominal frequency	600 MHz
CPU core count	1
Size of RAM	128 MB
10/100/1000 Ethernet ports	5
Wireless chip model	AR9344
Wireless standards	802.11b/g/n
Number of USB ports	1
Power Jack	1
PoE in	Yes
Supported input voltage	9 V – 30 V
Dimensions	113x138x29mm
Operating System	RouterOS
Tested ambient temperature	-20C .. +50C
License level	4
Antenna gain DBI	2.5
CPU	AR9344
Max Power consumption	Up to 7W
USB slot type	USB type A
Number of chains	2
Storage type	NAND
Storage size	128 MB

Mikrotik RB2011UiAS-2HnD-IN Routers Price

The RB2011Ui is a low cost multi port device series. Designed for indoor use, and available in many different cases, with a multitude of options.

The RB2011 is powered by RouterOS, a fully featured routing operating system which has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring – just a few of the vast number of features supported by RouterOS.

RouterBOARD 2011UiAS-2HnD has most features and interfaces from all our Wireless routers. It’s powered by the new Atheros 600MHz 74K MIPS network processor, has 128MB RAM, five Gigabit LAN ports, five Fast Ethernet LAN ports and SFP cage (SFP module not included!). Also, it features powerful 1000mW dual chain 2.4Ghz (2312-2732MHz depending on country regulations) 802.11bgn wireless AP, RJ45 serial port, microUSB port and RouterOS L5 license, as well as desktop case with power supply, two 4dBi Omni antennas and LCD panel- all this for only $129!

Tested and recommended to use with MikroTik SFP modules: S-85DLC05D, S-31DLC20D and S-35/53LC20D (not included)

RouterBOARD 2011UAS-2HnD-IN comes with desktop enclosure, LCD panel and power supply.

Wall mount kit (product code RBWMK) for network closet is available for purchase as an optional accessory.

The RB2011Ui also has passive PoE output capability on the last port (ETH10), this means you can power another device just by connecting it over regular Ethernet cable

Product specifications

Details
Product code	RB2011UiAS-2HnD-IN
CPU nominal frequency	600 MHz
SFP DDMI	Yes
CPU core count	1
Size of RAM	128 MB
10/100 Ethernet ports	5
10/100/1000 Ethernet ports	5
Wireless standards	802.11b/g/n
Wireless chip model	AR9344
Number of USB ports	1
Power Jack	1
PoE out	Yes
PoE in	Yes
Supported input voltage	8 V – 30 V
Voltage Monitor	Yes
PCB temperature monitor	Yes
Dimensions	214mm x 86mm for PCB
Operating System	RouterOS
Tested ambient temperature	-35C to +65C
License level	5
Antenna gain DBI	4
CPU	AR9344
Max Power consumption	11W
SFP ports	1
USB slot type	microUSB type AB
Number of chains	2
Serial port	RJ45
Storage type	NAND
Storage size	128 MB

RB951Ui-2HnD

The RB951Ui-2HnD is a wireless SOHO AP with a new generation Atheros CPU and more processing power. It has five Ethernet ports, one USB 2.0 port and a high power 2.4GHz 1000mW 802.11b/g/n wireless AP with antennas built in.

It has a 600MHz CPU,128MB of RAM and PoE output function for port #5 – it can power other PoE capable devices with the same voltage as applied
to the unit. Maximum load on the port is 500mA.

Package contains RouterBOARD 951Ui-2HnD in a plastic case and power adapter.

Product specifications

Details
Product code	RB951Ui-2HnD
CPU nominal frequency	600 MHz
CPU core count	1
Size of RAM	128 MB
10/100 Ethernet ports	5
Wireless chip model	AR9344
Wireless standards	802.11b/g/n
Number of USB ports	1
Power Jack	1
PoE out	Yes
Supported input voltage	7 V – 31 V
PoE in	Yes
Dimensions	113x138x29mm
Operating System	RouterOS
Tested ambient temperature	-20C +50C
License level	4
Antenna gain DBI	2.5
CPU	AR9344
Max Power consumption	Up to 7W
USB slot type	USB type A
Number of chains	2
Storage type	NAND
Storage size	128 MB

RB2011UiAS-RM

The RB2011 is a low cost multi port device series. Designed for indoor use, and available in many different cases, with a multitude of options.

The RB2011 is powered by RouterOS, a fully featured routing operating system which has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring – just a few of the vast number of features supported by RouterOS.

RouterBOARD 2011UiAS-RM, in comparison with RB2011L series, not only has five Gigabit LAN ports and five Fast Ethernet LAN ports, but also has RJ45 serial port, microUSB port and more RAM (128MB instead of 64MB). Also, it has RouterOS L5 license (instead of L4) and nice touchscreen LCD for configuration. SFP cage is also present (SFP module not included!)

There is PoE output function for port #10 – it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA.

Tested and recommended to use with MikroTik SFP modules: S-85DLC05D, S-31DLC20D and S-35/53LC20D (not included)

RouterBOARD 2011UiAS-RM comes with 1U rackmount enclosure, LCD panel and power supply.

Product specifications

Details
Product code	RB2011UiAS-RM
CPU nominal frequency	600 MHz
SFP DDMI	Yes
CPU core count	1
Size of RAM	128 MB
10/100 Ethernet ports	5
10/100/1000 Ethernet ports	5
Number of USB ports	1
Power Jack	1
PoE in	Yes
PoE out	Yes
Supported input voltage	8 V – 30 V
Voltage Monitor	Yes
PCB temperature monitor	Yes
Dimensions	214mm x 86mm for PCB
Operating System	RouterOS
Tested ambient temperature	-35C to +65C
License level	5
CPU	AR9344
SFP ports	1
USB slot type	microUSB type AB
Serial port	RJ45
Storage type	NAND
Storage size	128 MB

CRS125-24G-1S-2HnD-IN

Cloud Router Switch is our new Smart Switch series. It combines the best features of a fully functional router and a Layer 3 switch, is powered by the familiar RouterOS. All the specific Switch configuration options are available in a special Switch menu, but if you want, ports can be removed from the switch configuration, and used for routing purposes.
What’s more – this device has a built in 2.4GHz wireless access point, this means you can have an AP, a router with any number of ports, and a full wire speed smart switch, all in one device – ideal for medium/small businesses and offices. It has 24 Gigabit ports, one SFP cage, a microUSB port and a built in Wireless AP.

Perfect SOHO gateway router, switch, 11n AP all in one box
• Ethernet, Fiber, or 4G (with optional USB modem) gateway connection to Internet
• RouterOS gateway/firewall/VPN router with passive cooling
• up to twenty-five gigabit switch ports (1xSFP and 24xRJ45)
• 1000mW high power 2.4GHz 11n wireless AP

Product specifications

Details
Product code	CRS125-24G-1S-2HnD-IN
SFP DDMI	Yes
CPU nominal frequency	600 MHz
CPU core count	1
Size of RAM	128 MB
Architecture	MIPS-BE
10/100/1000 Ethernet ports	24
Wireless standards	802.11b/g/n
Wireless chip model	AR9344
Number of USB ports	1
Power Jack	1
PoE in	Yes
Supported input voltage	8 V – 28 V
Voltage Monitor	Yes
PCB temperature monitor	Yes
Dimensions	285x145x45mm
Operating System	RouterOS
Tested ambient temperature	-35C to +65C
License level	5
Antenna gain DBI	4
CPU	AR9344
Max Power consumption	19W
SFP ports	1
USB slot type	microUSB type AB
Number of chains	2
Serial port	RJ45
Storage type	NAND
Storage size	128 MB

CCR1016-12G BD Price

CCR1016 is an industrial grade super fast router with cutting edge 16 core CPU. If you need many millions of packets per second – Cloud Core Router is your best choice.

The cloud core router is powered by RouterOS, a fully featured routing operating system which has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring – just a few of the vast number of features supported by RouterOS.

The device is available with a 1U rackmount case, has twelve Gigabit ethernet ports, a serial console cable and a USB port. The CCR1016-12G has two SODIMM slots, by default it is shipped with 2GB of RAM, but has no memory limit in RouterOS (will accept and utilize 16GB or more). It comes with power supply and 1U rackmount case.

Product specifications

Details
Product code	CCR1016-12G
CPU nominal frequency	1.2 GHz
CPU core count	16
Size of RAM	2 GB
Architecture	TILE
10/100/1000 Ethernet ports	12
Number of USB ports	1
Power Jack	1
Supported input voltage	13 V – 28 V
Voltage Monitor	Yes
CPU temperature monitor	Yes
Dimensions	355x145x44mm
Operating System	RouterOS v6 (64bit)
Tested ambient temperature	-20C .. +60C
License level	6
Current Monitor	Yes
CPU	TLR4-01680CG-12CE-A3a
Max Power consumption	48W
USB slot type	microUSB type AB
Serial port	RS232
Storage type	NAND
Storage size	512 MB

Mikrotik CCR1036-8G-2S+Price in BD

Our fastest router has now become even better – the new CCR1036-8G-2S+ now has two SFP+ ports for 10G interface support (SFP+ module available separately). It uses the same 36 core Tilera CPU as our other CCR1036 model, and delivers the same performance, but now, ten gigabit links are possible.

The device comes in a 1U rackmount case, has two SFP+ ports, eight Gigabit ethernet ports, a serial console cable and a USB port.

The CCR1036-8G-2S+ has two SODIMM slots, by default it is shipped with 4GB of RAM, but has no memory limit in RouterOS (will accept and utilize 16GB or more). Also available now, the EM model with 16GB of RAM!

Supports both SFP (1.25G) and SFP+ (10G) modules